but in fact to note the place very much, little oil process appears simple. Must first confirm each parts, machine board, gem is clean? The residual dirt must be really clear, otherwise it will make effect after the point of oil. In addition, the use of clock parts
but they should pay attention to the place very much,http://www.luxuryonhere.com, oil process appears simple. Must first confirm each parts, machine board, gem is clean? The residual dirt must be really clear, otherwise it will make effect after the point of oil. In addition, using the clock and watch parts of oil must be the special oil, and each part of the oil are not the same, such as power systems must use slightly sticky oil (8300 oil) gear system is the use of thin oil (8000 oil) escapement system more must use special oil (9010/2 oil) all of oil in the end, otherwise it will cause serious damage to the core. Ball pen is an indispensable point of oil of various types of tools when usually one group of 4 teams,www.watchonhere.com, 8200 blue green suitable applicable 9010/2 red 8000 yellow 8300 applicable applicable to note every oil has its special pen,www.breitling-heuer.com, mix to the other or the oil will deteriorate deterioration can not be used. Automatic pen is usually used for thin light oil,www.luxuryonhere.com, adjusting the output of oil screw, can control the amount of oil is very convenient, very suitable for a small place with little oil.
must therefore 8300 lubricating oil, using a dedicated spring system due to large load. Different from general cognitive. Because the material progress, now spring material is in stainless steel production, so the whole point of the oil does not need a clockwork are full of oil (ever to do so because of the old material will rust, rust and whole spring is clamped) oiling way right to pen with 8300 lubricating oil, position point in the spring core and spring head, remember not excessive, otherwise the oil will overflow spring box. In addition, to increase the clockwork smooth degrees, can be stained with some oil, gently daub in the spring it, but please note if coated with a small piece of good, so extending time and tightening in spring, each side will naturally into oil spring. Spring oil after the mainspring can be cover up in combination with a spring core combination should pay attention to whether there is indeed a tight lid spring cover. Www.biao168.com
due to the great torque, bear on exercise needs key dial pin winding system is auspicious car and drum cart. So here need to point more viscous oil in order to maintain the best condition, used here for oil is 8300 lubricating oil and spring the same, little oil can be rotated winding system without load status gently, let the oil can be evenly spread. The key point of the gear system of oil for each wheel core, gemstones and hole, this >